Cài Driver Mtk Cho Win 10 – download Mtk Usb Drivers (All Latest Version)

Windows 10SamsungSP Flash ToolMediaTekToolsLinuxOdinMTKElectronicsVPN4G LTEHeimdallWindows Power ShellAcer Liquid E2 V370

This drivers will make the connection to your MTK device possible form a Windows 10 PC on a 32 or 64 bit configuration. The drivers that you will find on this page are unsigned so if you are running Windows 10 64 bit you are required to temporary disable the driver signature verification enforcement in order to be able to install.

To determine the version of Windows 10 that you have (32 bit or 64 bit):

Right-click on Start then click on SystemIn the System window that opens, in System section, you will find your version of Windows next to System type

To disable Windows 10 64 bit driver signature enforcement:

On your 64 bit Windows 10 desktop click on Start then on SettingsClick on Update & security then in the left pane click on RecoveryUnder Advanced startup click on Restart now buttonClick on Troubleshoot then on Advanced optionsClick on Startup Settings then on Restart buttonThe computer will restart with the Startup Settings screenTo disable the driver signature enforcement until next restart press on number key 7 or F7 on your keyboard.After restart you can proceed with the unsigned MTK drivers installation for your 64 bit WindowsAfter you install the unsigned drivers, to use them again in the future, you have to repeat this procedure

To install the MTK VCOM USB Drivers on 32 & 64 bit Windows 10:

download the drivers *.zip archive and extract the folder from inside on to the desktop:

*
*
*
*
*
*
*
*
*
*
*
*
*

In the Confirm Device Uninstall window make sure that the box Delete the driver software for this device is emptyYou need to leave the drivers in the operating system and only remove the device that you addedClick on the OK button to finalise

Now, when you will connect your dead (or turned off) MTK device to the Windows 10 computer by USB, the device will be recognized either trough a MediaTek Preloader USB VCOM Port interface or as a MTK USB port if it is bricked or it has bad/corrupt firmware. The SP Flash Tool will be able to transfer the firmware to your device trough this interfaces. Make sure you connect the device after you press the download button in SP Flash Tool, as the communication interface will only be alive for 2 seconds if no data is being sent.

download SP Flash Tool v3 & v5 – Latest versions

If you have trouble installing a new MTK driver in your system or you see a high or unusual number beside COM Ports displayed in the Device Manager, you might want to clean the USB driver garbage in your system with USBDeview – download USBDeview do.w.n.lo.ad for 32 & 64 bit Windows – learn what it does and how to get rid of unwanted USB drivers and COM Port duplicates.

Xem thêm bài viết thuộc chuyên mục: Cài win

Khuyễn Mãi Hot