Đăng Nhập Lb-Link – Hướng Dẫn Cài Đặt Wireless Router Lb

The B-LINK routerweb interface is the control panel for your router it's where all the settings arestored and changed. To make changes to your network you'll need to login to your B-LINK router.

Đang xem: đăng nhập lb-link

Accessing the B-LINK web interface is pretty straightforward and all you'll need is:

B-LINK routerAccess to the network, Either through LAN-cable or through Wi-FiA web browser, which you clearly have.

Following are the instructions to connect to your B-LINK router's interface for configuration anddiagnotstics.

To be able to reach the setup pages of your B-LINK router, you'll need to be connected to its network.So start by connecting to the network, either through WiFi or through ethernet cable.

Tip: If you don't know the WiFi password for your B-LINKrouter, you can always connect to it with an ethernernet cable, which won't require a password.

2. Open your web browser and navigate to192.168.16.1

Open your browser and type the router'sIP address into the addressfield. The most common IP for B-LINK routers is: If that IP address doesn't work, you can search thedefault B-LINK IP address list for your specific model.

Tip:Since you're already connected to your B-LINK router, you can also use whatsmyrouterip.com to quickly find the IP. It is the “Router Private IP”-value.

Xem thêm: Trình Chuyển File Powerpoint Sang Word Trực Tuyến Ppt Sang Docx

Type the ip into the address field and press go

In the username and password field, enter your current username and password and press enter / sign in.

If you're not sure about the username/password you can look at thedefault B-LINK credentialsto see what the defaults are, and how to reset to them. – The credentials can also be printed on the label on the back of your router.

That's it! You can now configure anything you want on the device.

Once you have logged in to the B-LINK admin interface you should be able to change any settings that areavailable. Be careful when you configure your router so that you don't break the network.

Tip: write down your current settings before changing anything sothat you can revert it incase of trouble.

In case you by mistake make some change that breaks your B-LINK home network, you can always go back tozeroby following the generic 30 30 30 hard reset trick.

Xem thêm: Báo Giá Phần Mềm Cloudoffice, Phần Mềm Quản Lý Văn Phòng Cloudoffice

This is usually the last resort, and if you still have access to the B-LINK interface you can always loginto try and revert the settings first (This of course assumes you wrote down the original value before changingit).

8 Best VPN Service Providers of 2020.Top 10 Wireless Travel Routers of 2020Top 7 NAS (Network Attached Storage) Brands of 2020Top 10 Powerline Network Adapters of 20207 Best Routers under $50 of 2020.10 Best Gaming Routers of 2020Top Parental Control Routers of 2020Top 10 Secure Routers of 2020The Best DD-WRT Routers of 2020.Top 10 802.11ac Wireless Router of 2020


report this adKnowledge baseWireless Routers 101 How to perform the 30 30 30 Hard reset for routers and modemsTop 12 Wireless Phone Chargers of 2020.Top Models by B-LINKBL-MP01BL-310RBL-MP02BL-WR3000Top BrandsNetgear router loginTP-LINK router loginLinksys router loginASUS router loginBelkin router loginCisco router loginArris router loginMotorola router loginXfinity router loginD-Link router login

Xem thêm bài viết thuộc chuyên mục: Đăng nhập

Khuyễn Mãi Hot