In order to configure the LED panels you will need to do.w.n.lo.ad the Linsn LED studio software. It”s free, however they will ask for a serial number- just enter “888888”.
Đang xem: Linsn led studio software do.w.n.lo.ad
Before opening the software, connect the sender board to the computer via USB. This will let you configure both the sender and receiver board. Now open the software and click Option>>Software Setup
In order to access the configuration screen, type “linsn” anywhere while the window is active. It doesn”t have to be in a text box. Typing those letters in sequence will bring up another password dialog box. The password is “168”.
On the sender tab, you can adjust the display resolution, mirror/rotation, as well the start X/Y position of what part of the screen will display on the LED wall. This will update in realtime. Click Save on Sender when you”ve got it where you want it.
On the receiver tab, load up the hoanhtao3d.vn_96x96.RCG configuration file, and the LED wall will mirror the 96×96 area you specified in the sender tab.The display connection tab is used for more elaborate setups with multiple receiver cards. In our case we”re only using one, displaying 96 x 96 pixels. If things aren”t working properly, load up the hoanhtao3d.vn_96x96.CON file.Don”t forget to Save on Receiver when you”re done configuring the settings.
Peter wrote in to us after following this tutorial and says…
During testing a 96 x 64 pixel video wall I experienced the following problems especially with your recently delivered LED panels (ID: 420):
Several red dots appeared across the screen. This is most striking (and disturbing) while fading scenes.
Furthermore, the video is displaced horizontally by one pixel, so the origin of the video on the upper left side must be located at (x, y) = (1, 0) instead of (0, 0).
Luckily, a small configuration change solves all problems. Please consider to modify the receiver card setting in “Adawall_96x96.RCG” as depicted to the left. Note: when setting “Scan clock” to 18.3 the software automatically sets the “Phase of clock” to 3, which seems to be a recommended value.
At this point you should see the top left 96 pixels mirrored on your LED wall! Mess around with the start X and start Y values on the sender configuration and load up some videos and gifs 🙂
This guide was first published on Jul 18, 2013. It was lastupdated on Jul 18, 2013.
This page (LED Studio Software Configuration) was last updated on May 10, 2021.
Text editor powered by tinymce.
You have been successfully subscribed to the Notification List for this product and will therefore receive an e-mail from us when it is back in stock!
For security reasons, an e-mail has been sent to you acknowledging your subscription. Please remember that this subscription will not result in you receiving any e-mail from us about anything other than the restocking of this item.
If, for any reason, you would like to unsubscribe from the Notification List for this product you will find details of how to do so in the e-mail that has just been sent to you!